Mechanically Attached Fitting ... the weldless, threadless way to join pipe/tube
Head Office: 1-877-643-8823

PYPLOK® FITTINGS

PYPLOK is a 360° radial swage mechanically attached fitting which permanently connects pipes for a leak free, cold connection. The system is fast, reliable and tamper proof, ideal for use in new build and maintenance works in the marine industry, where fire hazards exist and a clean piping connection is required.

DMO085 The PYPLOK connector is a metal sleeve which slides over the pipe, such as the pressfitting system. The outer diameter at each end of the connector is then swaged against the pipe in seconds using a hand held portable tool. PYPLOK fittings incorporates a sealing capability by using four non-metallic O-Rings.

PLOK DMZO 10-BTC 76-A105 F193 PYPLOK has been mechanically and environmentally tested according to many standards and procedures over the years. PYPLOK has passed combined impulse and vibration tests as well as shock and fire tests. PYPLOK was analyzed using FEA (Finite Element Analysis) to ensure compliance under ASME B31.1 / B31.3.

PYPLOK fittings can be used in a wide variety of low to high pressure piping applications in industries such as Marine & Offshore, Navy, Oil & Gas, Petrochemical, Steel, Mining and many other industrial uses. PYPLOK approvals: ABS, LR, DNV, BV, CCS, RMRS, CRN, TSSA, NAVSEA, CLASSNK, API 6FB and ISO 19921.

pyplok fittings

The only solution that offers the main qualities of the classic technologies at the same time:
fast and clean as a pressfitting, high pressure rated as a byte fitting
and reliable as a fully welded line, all in one product: PYPLOK.

pyplok fittings2

HEXAFLUID - HYDRAULIC SOLUTIONS
Visit our new website www.hexafluid.com for further info about our innovative weldless piping connection technologies

Via L. Da Vinci 26/A - 24062 COSTA VOLPINO - ITALY | This email address is being protected from spambots. You need JavaScript enabled to view it.

New Tube-Mac® Authorized Installer in the USA

The Tube-Mac® Group is pleased to announce that the appointment of All Industrial Inc., as a Tube-Mac® Authorized Installer in the USA. Based in Medina, Minnesota, their territory is the state of Minnesota, North and South Dakota, Iowa and Wisconsin.

All Industrial is a fast-growing, family operated specialty service provider in Minnesota and the surrounding area. Tim Zeug, President and Founder, has 26 years of hydraulic experience as a Rexroth sales & service technician before establishing his own business in 2007 to service hydraulic equipment. Tim and his team have a strong commitment to customer service and problem solving. Specializing in total machine care, they can provide everything from technical troubleshooting to routine maintenance, including modifications and now TMI non-welded piping systems.

All Industrial currently own a TFM-04 Flaring machine and pipe benders and as such they have successfully prefabricated and installed several piping sets using TMI 37⁰ flare flange technology and ST52.4 pipe. They were also trained in the use of PYPLOK® technology and installed a 2” stainless steel header system with vegetable oil as the medium in a food process plant. All Industrial can support local industries with pipe fabrication, supply, installation, pressure testing and oil flushing requirements.

Their management and employee philosophy is to provide reliable, high quality engineered products in a timely manner to service their customers. Expanding their product base by including Tube-Mac non-welded piping systems will provide a great opportunity for both All Industrial and Tube-Mac®.

Tube-Mac® welcomes All Industrial Inc., as an Authorized Installer into our group of companies.

ISO 9001:2015 and ISO 14001:2015 Certification for Tube-Mac® Spain

Tube-Mac® Piping Technologies, S.L. has recently obtained the certification ISO 9001: 2015 for Quality Management and ISO 14001: 2015 for Environmental Management, after successfully completing the audit process carried out by the certification company Bureau Veritas (BV).

The certifications guarantee the fulfillment of demanding Environmental and Quality Management controls both of our facilities and of the different services that we offer from Tube-Mac®, as an expert company in piping without welding.

The objective of the Tube-Mac® Quality Management system is the continuous improvement of processes, in order to offer our customers the best quality products and services. ISO 9001: 2015 is based on the principles of our business philosophy: customer orientation, staff participation, leadership, process-based approach, customer-focused objectives, continuous improvement and mutually beneficial relationships with our customers.

Likewise, we have obtained the ISO 14001: 2015 certificate of Quality and Environment, a certification that recognizes Tube-Mac® as a company committed to the search of sustainability of its activities with the environment.

All this will allow us to continue working to offer a greater added value and better quality services to our customers.

New Distributor in Italy

The Tube-Mac® Group is pleased to announce the appointment of HEXAFLUID Srl. also known as Hexafluid as our new PYPLOK® distributor throughout Italy.

Hexafluid has its head office located Costa Volpino in the province of Bergamo, Italy.

They are a complete solutions provider of Tube-Mac® PYPLOK® metric tube fittings and NPS pipe fittings for hydraulic, lubrication, steam lines, air, nitrogen, fuel and many other applications.

Their management and employee philosophy is to provide reliable, high quality engineered products in a timely manner to service their customers. Expanding their product base by including Tube-Mac® PYPLOK® fitting technology will provide a great opportunity for both Hexafluid and Tube-Mac®.

Tube-Mac® welcomes this new distributor into our group of companies.

Tube-Mac® Piping Technologies in Panama

 

The expansion of the Panama Canal involves the construction of a third set of gates that will allow for the passage of Post-Panamax vessels, which will double the Canal’s capacity. The new locks will have a total of 16 rolling gates (eight for each new lock complex), unlike the current canal which uses miter gates. Tube-Mac® supplied 1000's for flare flange and PYPLOK® fittings for the new Panama Canal locks under contract with Bosch Rexroth Germany. 72,000 feet (22,000 meters) of stainless steel hydraulic piping was installed for Culvert and Equalization Valves.

story1